First Steps

When you open the app for the first time, a window appears with the available pumps. The pumps each have a unique number. You can use this number to distinguish the pumps from each other. Name each pump so that you can identify and distinguish them more easily. The pumps make a clicking sound when they are activated.

You will find the installed pumps in the menu under "Change pumps " If you want to change the name, you can edit them using the pencil icon  To remove a pump from the app, press and hold the desired pump entry until the "Trash can button " appears. You can delete the respective pump entry by pressing this button.

Note: If you are using two pumps and two smartphones, install both pumps on both devices to avoid confusion. This process only needs to be done once.

Home screen

	Day mode
Press shortly:	Call up day mode
Press and hold:	Save day mode

	Night mode
Press shortly:	Call up night mode
Press and hold:	Save night mode

	Configuration menu
Press shortly:	Call up configuration menu
Press and hold:	Reset configuration

	Program menu
Press shortly:	Call up Program menu

Configuration

	Change pumps
Here you will find the pumps you have installed. If you want to change the entries, you can edit them using the pencil icon . To remove a pump from the app, press and hold the desired pump entry until the "Trash can button " appears. You can use this button to delete the respective pump. Swipe mode: Swipe mode is activated by pressing the "Hand button " (light blue = active). Swipe mode makes it easy to change the controlled pumps on the home screen. By swiping in the silhouette area, you can now switch back and forth between all controllable pumps.

	Memory button
Here you can view and change the pressure values for day and night mode. Day and night can be clicked individually. You will be taken to the corresponding menu where you can set the desired pressure values. Attention: the pump does not yet change the values.
	By pressing the "Wheel button", the pump sets the entered pressure value and adjusts the values accordingly.
	Press the "OK button" to save the pressure values.
	Pressing the "Back button" does not save the pressure values. You return to the memory interface.

	Lying analysis
The lying analysis measures you in your favorite sleeping position on the Dynaglobe® air core mattress, determines the optimum pressure for you and automatically adjusts itself to you. The determined pressure value is saved directly in the "Night Mode ". You can find detailed instructions on lying analysise here.

Programs

	Relax
The sleep program "Relax" allows you to sink gently into the mattress so that your body can gradually relax. At the end of the program, the mattress automatically switches into your saved night mode, allowing a gentle passing to sleep. The times of the "Relax" program can be selected:
kurz:	ca. 10 Min.
mittel:	ca. 20 Min.
lang:	ca. 30 Min.

	Power Nap
The program "Power Nap" helps you take a short nap to recharge your batteries. "Power Nap" puts you in a short, deeply relaxed state. After a selectable period of time (10 min. / 20 min. / 30 min.), you are gently woken up by the mattress gradually becoming firmer.
	You can optionally activate the alarm clock by pressing the "Alarm clock button" (light blue = active). This reliably wakes you up at the set time with a pleasant sound.

	Ortho
"Ortho" is the gentle stretching program for your spine. After a short program preparation, you will experience a stretching of your back and the intervertebral discs. You can set the period of the stretching phases or the duration of the disc regeneration (the longer, the gentler on the spine) according to your wishes:
short:	10 seconds
medium:	20 seconds
long:	30 seconds
The final firmness of the mattress can also be individually selected. You can set the maximum stretch value between 40 and 60. This ensures effective regeneration, adapted to each individual.

	changing lying phases
The program "changing lying phases" was specially developed for people with physical problems who need relief during sleep due to pain or restricted mobility. It allows you to automatically adjust the pressure in your mattress to relieve pressure points and alleviate pain. You can find detailed instructions on "changing lying phases" here.

You have the option of activating relaxation sounds for each program. You can also change or switch these off during the program. You can choose between rainforest, birdsong or waves.